Step 1: Put your phone into registration mode

Locate the page/intercom/find button on your phone’s base unit (this is the bigger unit which is plugged into your phone point).

Push the button and hold it for 3-5 seconds – you may hear a beep or a pulsing sound after doing this (depending on the model of the phone). The phone is now in registration mode and ready to be registered with Siemens handset.

Step 2: Registering the handset

On the handset select the menu buttons and follow the sequence below:

MENU - REGISTER H/SET – SELECT BASE STATION –ENTER THE SYSTEM PIN OF BASE STATION (default 0000) - PRESS OK – DISPLAY SCREEN

The handset should now be registered to the base station.

----------------------------------------------

* You can find more liGo quick start guides on our blog or by emailing us

* Please note the above steps are suggestions and you should always refer to the manuals provided by the manufacturer.